7
SOURCE ROTARY ENCODER
The source selection is controlled electronically, hence the way the source rotary encoder can spin
through a full 360°. An LED will light to show which input is currently selected.
RECORD SOURCE ROTARY ENCODER
The record selection is controlled electronically, hence the way the record rotary encoder can spin
through a full 360°. An LED will light to show which record source is currently selected. There is also a
hidden seventh position where no record source is selected, and no LED will be lit.
BALANCE CONTROL KNOB
The balance control is an ALPS unit that provides accurate alteration of relative gain between the right and
left channels. The balance control has a detent at the centre position.
VOLUME CONTROL KNOB
The volume control is an ALPS motorised unit that will accurately convey the selected source signal to the
line stage of the Plinius M16. When using the remote control to alter the volume level, stab the button to
make small adjustments, or hold the button down to continuously adjust the volume.
To Next Page
Loading...
