8
This panel incorporates all the terminals for connecting the input signals from your phono turntable, CD
player, tuner, etc, and the outputs to the power amp and mains supply.
Please remember that your Plinius M16 Preamplifier is a high quality electronic instrument capable of an
exceptional level of performance. Be sure that you understand your system’s requirements fully before
you make any connection to this preamplifier.
REAR PANEL SHOWING INPUT AND OUTPUT TERMINALS, CD SELECT, GROUND
LIFT AND STANDBY SWITCHES, MAINS SWITCH AND MAINS SOCKET.
INPUT TERMINALS
The input terminals of your Plinius M16 Preamplifier are easily accessible along the rear panel. These
standard RCA terminals are for use with single ended signals from line level audio components such as
CD, tuner, video, etc. Also included is one pair of balanced XLR inputs for use with XLR type cables. The
switch above the CD inputs is used to select either single-ended or XLR type input. If you wish to use the
XLR input, the switch above it must be set to XLR also, and the opposite is true for use of the RCA
terminals. Consult your PLINIUS
PLINIUSPLINIUS
PLINIUS dealer for further advice if required.
Note that in ‘line’ configuration (no phono stage installed) all the inputs can be used with normal line level
sources. If the optional phono stage has been installed, do not connect any source other than a suitable
phono turntable to the phono input.
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE RISK O F
COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CHASS IS
OPEN
STANDBY
CIRCUIT
GROUND
C.D.
MAINS FUSE
REPLACE ONLY WITH
SAME TYPE
VIDEO
To Next Page
Loading...
