If you prefer not to see this reminder message again, you may:
Check the box of [Do not show this message again] within this message
window, and then click [OK] button.
Click on the QuickScan icon
located on the Windows system tray.
Uncheck [Enable Warning] from the menu that pops up. Click the [No]
button in the message box that appears.
Attention
If you would like to be prompted with this message again,
you may click on the QuickScan icon
and check
[Enable Warning] from the menu that pops up. Click the
[Yes] button in the message box that appears.
Maintenance
To keep your scanner working smoothly, take a moment to review the
following maintenance tips.
Caution
• Avoid using the scanner in a dusty environment. When it is not in use, keep the
scanner covered. Dust particles and other foreign objects may damage the unit.
• Do not attempt to disassemble the scanner. There is danger of an electrical shock
and opening your scanner will void your warranty.
• Do not subject the scanner to excessive vibration. It may damage the internal
components.
• Be sure not to bump or knock the scanner glass as it is fragile and could break.
• Clean the scanner glass by lightly spraying a non-abrasive glass cleaner onto a
soft lint-free cloth. Then, wipe the glass thoroughly with the cloth. DO NOT
SPRAY CLEANER DIRECTLY ONTO THE SCANNER GLASS. Excess liquid
residue may fog or damage the scanner.
• Your scanner operates best in temperatures between 10
° C to 40° C (50° F to 104°
F).
20
To Next Page
Loading...
