PMC PH Series - Warranty Information

PH-20/PHX-20 Manual
3
WARRANTY
Polyurethane Machinery Corporation (hereinafter “PMC”) provides this LIMITED WARRANTY
(hereinafter “Warranty”) to the original purchaser (hereinafter “Customer”) covering this equipment and
the original PMC manufactured accessories delivered with the equipment (hereinafter “Product”)
against defects in material or workmanship of the Product (hereinafter “Defect” or “Defective”) for a
period of one (1) year from the date of first purchase as shown on the original PMC invoice (hereinafter
“Warranty Period”).
If during the Warranty Period under normal use, the Product is suspected by Customer to be Defective
in material or workmanship, it is Customer’s responsibility to contact PMC and return the Product to
PMC as directed by PMC, freight prepaid. If PMC determines that the Product is Defective and that
such Defect is covered by this Warranty, PMC will credit Customer for the reasonable freight charges
incurred by Customer in returning the Defective Product to PMC, and PMC (or its authorized agent)
will, at PMC’s option, repair or replace the Product, subject to the following:
Original Invoice: The original invoice must be kept as proof of the date of first sale and the Product
serial number. The Warranty does not cover any Product if the Original Invoice appears to have been
modified or altered, or when the serial number on the Product appears to have been altered or
defaced.
Product Maintenance: It is the Customer’s responsibility to maintain the Product properly. See your
maintenance schedule and owner’s manual for details. The Warranty does not cover an improperly
maintained Product.
Non-PMC Components and Accessories: Non-PMC manufactured components and accessories that
are used in the operation of the Product are not covered by this Warranty. Such components and
accessories shall be subject to the warranty offered to the Customer, if any, by the original
manufacturer of such component or accessory.
Other Warranty Exclusions: The Warranty does not cover any Product that PMC determines has been
damaged or fails to operate properly due to misuse, negligence, abuse, carelessness, neglect, or
accident. By way of example only, this includes:
Normal wear and tear.
Improper or unauthorized installation, repair, alteration, adjustment or modification of the
Product.
Use of heating devices, pumping equipment, dispensers, or other parts or accessories with the
Product that have not been approved or manufactured by PMC.
Failure to follow the operating instructions and recommendations provided by PMC.
Cosmetic damage.
Fire, flood, “acts of God,” or other contingencies beyond the control of PMC.