PH-20/PHX-20 Manual
8
TECHNICAL SPECIFICATIONS
Electrical
Main Voltage: ______________________________________ 3 x 208-230V, 50/60Hz
Electrical Consumption: PH-20, 2000 PSI (2 x 3.75 kW Heaters) ___ 27 A @ 3 x 230V
Electrical Consumption: PHX-20, 3000 PSI (2 x 4.5 kW Heaters) ____32 A @ 3 x 230V
Main Voltage: ________________________________________ 1 x 208-230V, 50/60Hz
Electrical Consumption: PH-20, 2000 PSI (2 x 3.75 kW Heaters) _____ 58 A @ 1 x 230V
Electrical Consumption: PHX-20, 3000 PSI (2 x 4.5 kW Heaters) _____ 65 A @ 1 x 230V
Main Voltage: ____________________________________________ 3 x 380V, 50/60Hz
Electrical Consumption: PH-20, 2000 PSI (2 x 3.75 kW Heaters) _____ 23 A @ 3 x 380V
Electrical Consumption: PHX-20, 3000 PSI (2 x 4.5 kW Heaters) _____ 27 A @ 3 x 380V
Material Heater Power: PH-20 (2 x 3.75 kW) ______________________________ 7.5 kW
Material Heater Power: PHX-20 (2 x 4.5 kW) ______________________________ 9 kW
Hose Transformer Power: ___________________________________________ 2 KVA
Electrical Motor Power: ________________________________________________ 3 hp
CAUTION! Inside the console, is a Terminal Strip for connecting
the main power (wire not supplied) to the PH Series
Proportioner. This electrical connection must be made only by
a qualified electrician.
Mechanical
Maximum working pressure PH-20 (with 123 pumps): ______________________ 2,000 psi
Maximum working pressure PHX-20 (with 61 pumps): _____________________ 3,000 psi
Maximum production ratio 1:1 PH-20 (with 123 pumps): ____________________ 20 lb/min
Maximum production ratio 1:1 PHX-20 (with 61 pumps): _____________________ 1.3 gpm
Minimum production: ________________________________________________ 2 lb/min
Maximum hose length: _________________________________________________ 210 ft
Approximate weight (Hydraulic Tank empty): ______________________________ 365 lbs
Approximate weight (Hydraulic Tank full @ 12 gal): _________________________ 435 lbs
Dimensions: __________________________________________ 30in W x 26in D x 45in H