PH-20/PHX-20 Manual
5
SAFETY AND HANDLING
This chapter contains important information on the safety, handling and use of your
Classic
PH Series Proportioner.
Before installing the PH Series Proportioner and start-up,
carefully read all the technical and safety documentation
included in this manual. Pay special attention to the
information to know and understand the operation and the
conditions of use of the PH Series Proportioner. All of the
information is aimed at enhancing User Safety and avoiding
possible breakdowns derived from the incorrect use of the PH
Series Proportioner.
WARNING! presents information to alert of a situation that might cause serious
injuries if the instructions are not followed.
CAUTION! presents information that indicates how to avoid damage to the
Proportioner or how to avoid a situation that could cause minor injuries.
NOTE! is relevant information of a procedure being carried out.
Careful study of this manual will enable the operator to know the characteristics of the PH
Series Proportioner and the operating procedures. By following the instructions and
recommendations contained herein, you will reduce the potential risk of accidents in the
installation, use or maintenance of the PH Series Proportioner; you will provide a better
opportunity for incident-free operation for a longer time, greater output and the possibility of
detecting and resolving problems fast and simply.
Keep this Operations Manual for future consultation of useful information at all times. If you
lose this manual, ask for a new copy from your PMC Service Center, directly contact PMC or
on line at our web site (www.polymac-usa.com).
To Next Page
Loading...
