PM95 Android 13 User Manual
Getting Started
20
© 2024 Point Mobile Co., Ltd. All rights reserved
Battery hot swap
Battery hot swap is a feature that allows users to replace the battery without powering off.
PM95 supports two types of hot swap mode, Enterprise Hot Swap, and Legacy hot swap. Basically, the device
enters Enterprise Hot Swap mode. You can change the preferred hot swap mode in EmSettings.
Enterprise Hot Swap
Enterprise hot swap allows the device to maintain Wi-Fi/Bluetooth connectivity and memory persistence even
when detaching the battery. Users can earn time to replace the battery without stopping the ongoing task or
disconnecting the Bluetooth devices.
But, as the backup battery with a smaller capacity than the main battery takes over to maintain the system, users
are highly recommended to replace the battery within 30 seconds (30 seconds countdown displays). And some
mitigations are activated to conserve power consumption.
Reducing display brightness to about 10%
Disabling NFC, Scanner
Lowering sound volume
Once the user replaces the battery with a charged one, the device will come back to normal operation mode
without booting process.
Legacy hot swap
When the battery is removed from the device, the display turns off, the device enters Hot swap mode and waits
for battery replacement.
Once you replace the battery to a new one, the device will come back to normal operation mode without booting
process.