Point Mobile PM95 - Scanner Settings Configuration

PM95 Android 13 User Manual
53
© 2024 Point Mobile Co., Ltd. All rights reserved
Scanner
Notice: Scanner is embedded on the PM95 Scanner SKU or MSR/ICCR SKU (SKU1, 2, 4).
Scanner is placed on the top of the device. Optimize the scanner settings for working environment and improve the
efficiency.
Turn on / off the Scanner
The scanner is turned off by default. To turn on the scanner, follow the steps.
1. Go to
EmKit
or
Settings
and tap
ScanSettings
.
2. Tap toggle button to turn on/off the barcode scanner.
3. Check if the scanner icon is placed on Status bar.
Figure 59 Turn on scanner