PM95 Android 13 User Manual
System Maintenance
82
© 2024 Point Mobile Co., Ltd. All rights reserved
Factory data reset via recovery mode
If device works abnormal so does not turn on, try to perform factory data reset through Android recovery mode.
1. Press and hold
Power button
+
Volume down + Scan (left)
buttons simultaneously when PM95 is
turned off.
2. After short vibration, release the power button.
3. Using the buttons below, select Recovery mode.
Move up/down Volume up/down
Select the menu Power button
4. Using the same buttons as step 3, select Wipe data/factory reset.
5. Select Factory data reset.
6. After wiping the data, select Reboot system now