What does error E3/E4 mean on my Point Hob, and how can I fix it?
Error codes E3 or E4 on your Point Hob indicate that the temperature sensor of the ceramic glass plate is too high. To resolve this, please restart the hob after it cools down.
What to do if some buttons don’t work, or the LED display is not normal on point 5 Series Hob?
If some buttons on your Point Hob aren’t working or the LED display is abnormal, the display board is likely damaged and needs to be replaced.
What to do if the LED doesn't come on when the Point Hob is plugged in?
If the LED doesn't illuminate when the unit is plugged in, it could be due to several reasons. First, ensure the plug is securely fitted into the outlet and that the outlet is functioning correctly. Secondly, check the connection between the accessorial power board and the display board. If these are not the issue, the accessorial power board or the display board might be damaged and need replacement.
What to do if my point 5 Series Hob displays error E1/E2?
If your Point Hob is showing an E1 or E2 error, it indicates an abnormal supply voltage. Inspect whether the power supply is normal. Once the power supply issue is resolved, power on the hob again.
What to do if the LED does not come on when the point 5 Series Hob is plugged in?
If the LED doesn't light up when you plug in your Point Hob, start by checking if the plug is securely in the outlet and that the outlet is working. Also, examine the connection between the accessorial power board and the display board. If these steps don't resolve the issue, the accessorial power board or the display board might be damaged and need replacement.
What does EL/EH error mean on a Point Hob?
The EL/EH error code indicates an abnormal supply voltage. Power on the hob after the power supply returns to normal.
Why does the fan motor on my point 5 Series Hob sound abnormal?
An abnormal sound from the fan motor indicates that the fan motor is damaged and needs replacement.
What does C2 error mean on a Point Hob?
The C2 error code indicates that the temperature sensor of the IGBT is high. Please restart the induction hob after it cools down.
What does C1 error mean on a Point Hob?
The C1 error code indicates that the temperature sensor of the ceramic glass plate is high. Please restart the induction hob after it cools down.
Why aren't some buttons working, or why is the LED display abnormal on my point 5 Series Hob?
If some buttons aren’t working or the LED display is abnormal, the display board may be damaged and require replacement.
Safety precautions related to electrical shock during operation and maintenance.
Warning about hot surfaces and precautions to avoid burns.
Instructions on how to properly use and interact with the touch-sensitive controls.
Step-by-step instructions on how to initiate the cooking process on the hob.
Procedure for activating the power boost function for rapid heating.
Instructions on how to deactivate the boost function and revert to normal settings.
Guide to activating the three levels of special functions like keep warm, melting, and frying.
How to use the timer as a minute minder without affecting cooking zones.
Procedure for activating the boiling cue function to signal boiling water.
Table listing common failure codes, their possible causes, and recommended solutions.
Detailed instructions for safely connecting the hob to the mains power supply.
General| Fuel Type | Gas |
|---|---|
| Number of Burners | 5 |
| Material | Stainless Steel |
| Ignition Type | Automatic |
| Gas Type | LPG |
To Next Page
