To Next Page
R
Rebecca SchroederAug 27, 2025
What does EF error mean on a Point Hob?
- MMichael BerryAug 27, 2025
The EF error code indicates that two or more keys have been triggered for an extended period. Cleaning the operation area may resolve this issue.
What does EF error mean on a Point Hob?
The EF error code indicates that two or more keys have been triggered for an extended period. Cleaning the operation area may resolve this issue.
Why do heating zones on the same side of my Point Hob display a blank space?
If heating zones on the same side display a blank space, check the connection between the power board and the display board. If the connection is correct, the display board of the communicate part or the main board might be damaged and need to be replaced. In the case of main board damage, replace the power board.
What to do if the Cooking Mode Indicator is on, but the point 5 Series isn't heating?
If the Cooking Mode Indicator is illuminated but heating does not commence, it may be because the hob's temperature is too high, potentially due to a high ambient temperature or blocked air intake/vent. Another possibility is an issue with the fan; check if the fan runs smoothly and replace it if necessary. Lastly, the power board could be damaged, requiring replacement.
Why does the point 5 Series stop heating suddenly and the display flashes?
If heating stops suddenly and the display flashes, it could be due to the following reasons: the pan type is not correct, so use the proper pot as described in the instruction manual. Also, the unit may be overheated; in this case, wait for the temperature to return to normal and then push the “ON/OFF” button to restart the unit.
Safety precautions related to electrical shock during operation and maintenance.
Warning about hot surfaces and precautions to avoid burns.
Instructions on how to properly use and interact with the touch-sensitive controls.
Step-by-step instructions on how to initiate the cooking process on the hob.
Procedure for activating the power boost function for rapid heating.
Instructions on how to deactivate the boost function and revert to normal settings.
Guide to activating the three levels of special functions like keep warm, melting, and frying.
How to use the timer as a minute minder without affecting cooking zones.
Procedure for activating the boiling cue function to signal boiling water.
Table listing common failure codes, their possible causes, and recommended solutions.
Detailed instructions for safely connecting the hob to the mains power supply.
General| Fuel Type | Gas |
|---|---|
| Number of Burners | 5 |
| Material | Stainless Steel |
| Ignition Type | Automatic |
| Gas Type | LPG |
