CR Family Hardware
Installation Guide
CR Family Hardware Installation Guide Page 21 of 30
Copyright © 2016 by Pointer Telocation, Ltd.
4.4 Installing the SIM Card
To install the SIM card, perform the following steps:
------------------------------------------------------------------------------------------------
NOTE: Make sure that your SIM card PIN is identical to the PIN programmed in the unit,
or disabled. The default value of the unit PIN code is 1234. If the SIM PIN and the unit pin
differ, insert the SIM card into a regular cellular phone and either change its PIN to the
unit PIN (1234) or disable it.
SIM PIN protection and value (locking the SIM) can be activated automatically providing
PIN synchronization between the SIM and the unit.
------------------------------------------------------------------------------------------------
1. Remove the back cover of the CR unit by removing the two securing screws.
Figure 14: Back of Unit Showing Two Securing Screws
To Next Page
Loading...