CR Family Hardware
Installation Guide
CR Family Hardware Installation Guide Page 7 of 30
Copyright © 2016 by Pointer Telocation, Ltd.
Figure 2: CR unit – Internal View
2.2 CR Family Unit Types
The CR Family includes the CR-300 and CR-300B. The CR variants are advanced
integrated GPS/GPRS units designed for fleet management and SVR applications. The unit
also includes a GNSS receiver and a 32-bit processor and memory providing storage for
generated events.
The CR-300B also includes a battery which provides a better solution for SVR applications.
2.3 CR Family Harnesses
The CR units support the following harnesses:
711-00276 CR Six wires main harness.
711-00301 CR Family 6 Wires mold Harness. The harness is replaced by the
711-00331 CR Family 7 Wires mold Harness
711-00280 CR Family Fuse Harness
711-00331 CR Family 7 Wires mold Harness
711-00328 CR Family 10 Wires mold Harness
This document explains in detail how to use the 711-00328 CR Family 10 Wires mold
Harness Kit for proper installation.
Please refer to Cellocator Fuse Harness Overview for installation instructions for the Fuse
Harnesses.
To Next Page
Loading...