To Next Page
W
William GrahamAug 14, 2025
What to do if my Pointman TP-9000 shows a Command Error?
- DDiana BellAug 15, 2025
If your Pointman Printer displays a Command Error, send the command corresponding to the correct format.
What to do if my Pointman TP-9000 shows a Command Error?
If your Pointman Printer displays a Command Error, send the command corresponding to the correct format.
What to do if my Pointman TP-9000 Printer has an Invalid Parameter error?
If your Pointman Printer shows an Invalid Parameter error, set the parameter corresponding to the correct format.
Covers safe practices for power, installation, cleaning, and general use.
Specific guidelines for printer placement and general handling.
Lists supported operating systems and computer specifications.
Step-by-step guide to install the printer driver and software.
Accepting the license and choosing the installation port (USB/Network).
Setting up network connection details for the printer.
Steps after installation is complete and verifying software.
How to set the card printer as the default printing device.
How to change the printer port for USB or Network printing.
Steps to connect the printer to a network automatically using DHCP.
Steps to manually configure IP address, subnet mask, and gateway.
Manual network setup via USB connection.
Completing the driver installation process.
Inputting IP address, Subnet Mask, and Gateway for manual network setup.
Saving network settings and rebooting the printer.
Verifying that network settings have been applied successfully.
Procedure to check the printer's IP address using the LCD.
Overview of printing a card and setting printer properties.
Steps to launch and begin using the Card Designer software.
Using the wizard to synchronize data from Excel or Access.
Selecting database files, image folders, and sheets for synchronization.
How to clean the inside transport rollers using a cleaning card.
Interpreting error codes when the front LED indicates a problem.
General
