GENERAL INFORMATION
1.19
THROTTLE CABLE / ELECTRONIC THROTTLE
CONTROL (ETC SWITCH) ADJUSTMENT, CONT.
NOTE:
Whenever throttle cable adjustments are made,
always check oil pump adjustment and re-adjust if neces-
sary.
8. Turn handlebars from left to right through the entire
turning range. If idle speed increases, check for
proper cable routing. If cable is routed properly and
in good condition, repeat adjustment procedure.
1/16″ - 1/8″
Freeplay
Direction
of travel
Ill. 3
Switch Plunger Must
Be Held In By Cable
Tension
Ill. 4
Throttle Cable
Adjuster
Lock Nut
To Next Page
Loading...
Need help?
General
