36
THE PERFECT FIT
IQ Rear Suspension Adjustments
Weig h t Transfer During Acceleration
IQ Rear Rear Scissor Stop (RRSS)
The preferred method for controlling weight
transfer during acceleration of the IQ rear
suspension is by adjusting the R RSS. Use the
scissor stop tool (1) located in your tool kit t o
make the adjustments.
To decrease weight transfer under acceleration
(for improved cornering), rotate the RRSS to
a higher position.
To increase weight transfer or ski lift during acceleration, move the
RRSS to the rearward upper position. The RRS S m ay also be rotated to
a lower position for even more weight transfer if desired.
A - Low Position - This setting will increase weight transfer.
B - Medium Position - This setting is t he production setting and will
provide the best overall trail riding.
C - High Position - This setting will decrease weight transfer.
D - Rearward Upper Position (optional hole l ocation) - This setting
will increase weight transfer.
NOTE: Your dealer can help you with initial set-up and additional
set-up instructions to help you achieve an optimum ride.
z
1
A
B
D
C
To Next Page
Loading...
Need help?
General
