EasyManua.ls Logo

Polaris 440 IQ - PRE-RIDE INSPECTIONS

Polaris 440 IQ
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
PRE-RIDE INSPECTIONS
Before Starting the Engine
n
Hydraulic Brakes
Always check the
following items to assure
proper operation before
starting the engine.
Brake Lever Travel
Squeeze the brake lever.
It should move no closer
to the handgrip than 1/2
(1.3 cm). A smaller
distance indicates low brake fluid level or air in t he hydraulic system.
Refer to the brake bleeding information on page 80.
Lever Feel
If the brake lever feels “spongy” when squeezed, check the brake fluid
level and condition. Add fluid as needed. See page 79.
Check for the presence of air in the fluid system. See page 80 for more
information, or see your dealer for service.
WARNING
Continued use of spongy” brakes may cause a complete loss of
brakes, which could result in serious injury or death. Always have
the brakes serviced at the first sign of sponginess.
1/2 (1.3 cm)

Table of Contents

Related product manuals