41
THE PERFECT FIT
Accessories
Wear Strips
Polaris IQ models are manufactured with tunnel wear strips or wear
strip coolers installed. To avoid excessive tunnel wear, tunnel wear
strips must be installed whenever track studding is used.
Wear strips are designed for a specific stud length. See your dealer’s
studding chart for recommended traction accessories.
Components as viewed from the rear of the track:
1. Top of tunnel
2. Wear strip
3. Track
4. Wearstrip mounting holes
CAUTION
Whenever wear strips are relocated, be sure there’s adequate
stud clearance to the heat exchangers. Lack of clearance may
result in damage to heat exchangers.
4
1
2
3
To Next Page
Loading...
Need help?
General
