66
MAINTENANCE
Lubrication
n
Chaincase Oil Level
It’s the operator’s responsibility to check and maintain the proper
chaincase oil level.
To check the oil level, place the machine on a level surface. The oil
level should be between the “safe” marks on the dipstick (A). Add
Polaris synthetic chaincase oil through the dipstick opening. Do not
overfill. See page 99 for the part numbers of Polaris products.
Flush the chaincase after the first 500 miles, then every 1000 miles or
seasonally. Clean the magnetic plug (B) whenever checking or
changing lubricant.
CAUTION
Mixing brands or using non-recommended lubricants could result
in excessive wear to internal components. Always use
Polaris-recommended products for your vehicle.
A
B
To Next Page
Loading...
Need help?
General
