2
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
2.25
4. Turn the L-wrench counterclockwise to tighten the
sheaves. Work the belt around the clutches as you
remove the L-wrench. Doing so will set the belt in “low
gear”.
5. Reinstall the wrench
q
to the wrench bracket to
secure the fender to the console.
6. Reinstall the left side panel.
7. When installing a new belt, follow the belt break-in
procedures.
MAINTENANCE
To Next Page
Loading...
