3
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
3.69
4. Install the recoil starter pulley
e
and recoil starter
pulley fasteners
r
onto the flywheel. Apply Loctite
262 to 2-3 threads max. in middle of threaded
section. Torque fasteners to specification.
TORQUE
Recoil Starter Pulley Fasteners:
10 ft-lbs (13 N·m)
NOTICE
The recoil fan is balanced and can only be installed on
the flywheel one way because of an asymmetrical hole
pattern.
5. Install the recoil housing and fasteners. Torque
fasteners to specification.
TORQUE
Recoil Housing Fasteners:
9 ft-lbs (12 N·m)
Torque in sequence page 3.50
6. Reinstall the exhaust silencer and pipe. See Exhaust
Installation.
ENGINE / COOLING / EXHAUST
To Next Page
Loading...
Need help?
General
