8.22
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
4. Reinstall the steering tie rod end
i
, washer
u
, and
new flange nut
y
. Torque new flange nut to
specification.
NOTICE
Verify the washer is installed under the rod end flange.
TORQUE
Steering Tie Rod End Spindle Nut:
37 ft-lbs (50 N·m)
5. Install the rubber ski stop
t
into the ski and reinstall
the ski
r
to the spindle.
6. From outside of ski, install fastener
w
, washers
e
,
and new flange nut
q
. Torque new ski flange nut to
specification.
NOTICE
Verify the washers are installed dome-side out.
TORQUE
Ski Fastener Flange Nuts:
37 ft-lbs (50 N·m)
STEERING / SUSPENSIONS
To Next Page
Loading...
Need help?
General
