To Next Page

To Previous Page

8.58

9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual

SKAG REPLACEMENT

NOTICE

Always replace ski skags in pairs.

1. Raise and support the front of the snowmobile so the

skis are approximately 6 in (15.2 cm) from the

ground.

2. Remove the attaching nuts

and pry the skag

downward.

3. Reverse the steps to install a skag. Tighten nuts to

specification.

TORQUE

Ski Skag Nuts:

8 ft-lbs (11 N·m)

STEERING / SUSPENSIONS

Polaris 850 MATRYX SWITCHBACK ASSAULT 146 2021 User Manual

Questions and Answers: