9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
1.69
18.At this point the reflash process will begin. Do not
touch the vehicle or PC during the process.
19.Once the ECU reprogramming procedure is
complete, click “Continue”. Cycle the power to the
ECU by disconnecting the Chassis Power-Up
Harness connector from the ECU PWR Test
connector.
20.Wait for 10 seconds.
21.Reconnect the Chassis Power-Up Harness connector
to the ECU PWR Test connector.
GENERAL INFORMATION
1
To Next Page
Loading...
