7.14
9929422 R02 - 2017-2019 ACE 900 Service Manual
© Copyright Polaris Industries Inc.
10.Loosen and remove the lower A-arm front through-
bolt fastener
t
and rear through-bolt fastener
y
.
11. Remove lower shock fastener
u
from lower A-arm.
12.Using a soft faced hammer, lightly tap on the bearing
carrier while removing the upper joint end.
13.Remove the bearing carrier and lower A-arm from the
front drive shaft.
14.With a short, sharp jerk, remove drive shaft from the
front gearcase.
FINAL DRIVE