What causes the drive belt to turn over on my Polaris Offroad Vehicle?
If the drive belt turns over on your Polaris Offroad Vehicle, it could be due to: * Wrong belt for application: Replace the drive belt. * Clutch alignment out of spec: Contact your dealer. * Engine mount broken or loose: Inspect and replace. Contact your dealer.
Why is the steering heavy on my Polaris Axys 2015 800 RUSH Offroad Vehicle?
If the steering on your Polaris Offroad Vehicle feels heavy: * Make sure spindles and all steering components turn freely. * Check ski alignment. * Check skags and skis for damage. * Adjust rear shock spring. * Increase front track shock spring preload in 1/8in. increments.
What causes the front end of my Polaris Axys 2015 800 RUSH Offroad Vehicle to push?
If the front end of your Polaris Offroad Vehicle pushes, try the following: * Decrease front track shock spring preload in 1/8in. increments. * Increase front suspension shock spring preload in 1/8in. increments. * Check for worn skags. * Adjust rear shock spring. * Check for binding front suspension shafts and steering components.
Why does my Polaris Axys 2015 800 RUSH dart from side to side?
If your Polaris Offroad Vehicle darts from side to side, consider these possible solutions: * Check ski alignment. * Make sure spindles and all steering components turn freely. * Check for excessive play in steering assembly (see your dealer). * Ensure skags are straight on skis. * Adjust rear shock spring. * Check rail slide/replace if worn.
What causes the track to skip or ratchet on my Polaris Axys 2015 800 RUSH?
If the track skips or ratchets on your Polaris Offroad Vehicle: * Track tension too loose. * Studs (if installed) are loose. Follow manufacture’s installation instructions and re-torque studs.
How do I fix too little weight transfer when climbing with my Polaris Axys 2015 800 RUSH?
To adjust for too little weight transfer when climbing with your Polaris Offroad Vehicle, adjust the rear shock spring.
General| Brand | Polaris |
|---|---|
| Model | Axys 2015 800 RUSH |
| Category | Offroad Vehicle |
| Language | English |
Guidance for safe operation, covering rider behavior, conditions, and potential hazards.
Identifies and explains the location and meaning of critical safety warning labels.
Explains the procedure for adjusting the vertical aim of the headlight.
Describes the console storage compartment heated by engine compartment heat.
Details the location and protection of the 12-volt DC receptacle.
Discusses the attachment and removal of optional saddlebags.
Guides on changing the fuel type designation setting in the instrument cluster.
Explains the DET system that prevents engine damage from detonation.
Describes how the instrument cluster indicates engine overheating and required actions.
Details the function of various warning and status lights on the instrument cluster.
Provides an overview of the instrument cluster, its displays, and controls.
Explains the displays and operation of the rider information center.
Details the optional security system for preventing unauthorized use of the vehicle.
Provides a step-by-step guide for adjusting the snowmobile's suspension.
Details factory spring and clicker settings for the front IFS suspension.
Correlates ride experience feedback with specific suspension adjustment recommendations.
Outlines factory spring and clicker settings for the front track shock.
Provides factory spring and clicker settings for the rear track shock.
Explains how to adjust the limiter strap for ride characteristics.
Covers adjustments for riser angle and handlebar angle to suit rider preference.
Lists torque specifications for various handlebar components.
Discusses the use and installation of studs and carbide skags for traction.
A comprehensive list of items to inspect before each snowmobile use.
Details visual inspection of suspension components for looseness or damage.
Covers inspection of brake lever travel, feel, and fluid level for safety.
Emphasizes checking the steering system for ice/snow buildup and component integrity.
Details inspection of the track for damage and warranty considerations.
Guides on checking essential systems like switches, lights, and mirrors before driving.
Explains the three positions of the ignition switch and their functions.
Lists methods for stopping the snowmobile in emergency situations.
Provides step-by-step instructions for starting the engine, including electric and recoil start.
Offers procedures for restarting the engine if it stops unexpectedly.
Outlines recommended procedures for breaking in new or rebuilt engines.
Details the process for warming up the engine, drivetrain, and track before riding.
Covers fuel handling safety, including flammability and exhaust toxicity warnings.
Explains how to check and maintain the engine oil level for proper lubrication.
Describes the function and operation of the auxiliary engine stop switch.
Explains the throttle release switch's role in stopping the engine if throttle fails to close.
Covers throttle lever operation, inspection, and freeplay adjustment.
Details the operation of the electronic reverse control system.
Provides instructions for parking and securing the snowmobile after each ride.
Offers safety warnings and procedures for towing the snowmobile.
Explains emission control labels, requirements, and owner responsibilities.
Outlines the recommended schedule for regular maintenance and service checks.
Provides a detailed table of maintenance tasks and their frequencies.
Lists and explains diagnostic codes related to various vehicle components.
Details the removal and installation procedures for the hood and side panels.
Describes the L-wrench and tool kit provided with the snowmobile.
Instructs on lubricating the rear shock body threads seasonally.
States that the driveshaft bearings are sealed and require no additional lubrication.
Covers checking and changing the chaincase oil level and procedures.
Explains the function of intake foam filters and their periodic cleaning.
Provides recommendations for spark plug type, gap, torque, and inspection.
Details coolant type, level checks, flushing, and bleeding procedures.
Guides on inspecting the exhaust system for wear or damage at specified intervals.
Explains the importance of correct drive chain tension and adjustment procedures.
Covers hydraulic brake inspection, excessive lever travel, and fluid replacement.
Details clutch inspection, cleaning, alignment, and drive belt maintenance.
Covers track inspection, lubrication, tension adjustment, and alignment.
Guides on inspecting front and rear suspension components, skis, and skags.
Provides instructions for battery removal, installation, charging, and storage.
Covers common engine problems, their probable causes, and solutions.
Addresses issues like bottoming suspension, stiff rides, and darting.
Helps diagnose belt wear or burn issues based on driving conditions.
Explains how to obtain service and warranty assistance from a dealer.
Details the terms, duration, and transferability of the limited warranty.
Lists what is covered and excluded under the warranty terms.
Provides instructions on obtaining warranty service domestically and internationally.
Outlines warranty policy for products sold outside the dealer's authorized country.
Describes the specific limited warranty for emissions-related components.
To Next Page
