31
FEATURES AND CONTROLS
Instrument Cluster
Engine Temperature
Engine temperature can be displayed in F° or ° C. Refer to
“Units of Measurement” to change the format.
Clock
The clock displays the time in a 12-hour or 24-hour format.
Refer to “Units of Measurement” to change the format (Stan-
dard 12-hour / Metric-24 hour). To set the clock, follow these
steps:
1. Toggle the MODE button until the odometer is displayed.
2. Press and hold the MODE button until the hour segment
flashes. Release the button.
3. With the segment flashing, tap the MODE button to
advance to the desired setting.
4. Press and hold the MODE button until the next segment
flashes. Release the button.
5. Repeat steps 3-4 twice to set the 10 minute and 1 minute
segments. After completing the 1-minute segment, step 4
will save the new settings and exit the clock mode.
To Next Page
Loading...
Need help?
General
