4
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
© Copyright Polaris Industries Inc.
4.19
9. Go to www.polarisdealers.com and click on “ReFlash
Authorization” from the “Service and Warranty” drop-
down menu.
10. Enter or paste the Request Code into the box.
11. Select the same file type from the list that you
selected previously while in Digital Wrench®. Enter
the VIN along with the customer’s name and
address. When completed, click the Authorize button
once to proceed.
12. An “Authorization Key” will appear in the upper left
corner of the screen. Copy this key exactly as it
appears.
13. Enter or paste the Authorization Key in the box
located on the Digital Wrench® screen. Click the
‘Continue’ button and follow instructions provided on
the screen to complete reprogramming procedure.
14. At this point the reflash process will begin. Do not
touch the vehicle or PC during the process.
15. Once the ECU reprogramming procedure is
complete, click the ‘Finish’ button on the screen.
Turn the key off, wait 30 seconds, and then turn the
key on to verify the reflash was successful.
ENGINE ELECTRICAL
To Next Page
Loading...
Need help?
General
