ENGINE
3.8
ACCESSIBLE COMPONENTS
The following components can be serviced or removed with the engine installed in the frame:
S Flywheel
S Alternator/Stator
S Starter Motor/Starter Drive
S Cylinder Head
S Cylinder
S Piston/RIngs
S Camshaft
S Rocker Arms
S Cam Chain and Sprockets
S Water Pump / Water Pump Mechanical Seal*
The following components require engine removal for service:
S Oil pump / Oil Pump Drive Gear
S Counterbalance Shaft or Bearing(s)
S Connecting Rod
S Crankshaft
S Crankshaft Main Bearings
S Crankcase
*It may be necessary to loosen engine mounts and move engine slightly to access water pump. Special tool PN
2872105 is required to replace mechanical seal with engine in frame.
To Next Page
Loading...
