ENGINE
3.27
CYLINDER HEAD DISASSEMBLY
W ARNING: Wear eye protection or a face shield during
cylinder head disassembly and reassembly.
NOTE: Keepallpartsinorderwithrespecttotheirlocation
in the cylinder head.
1. Usinga valvespringcompressor, compressthevalve
spring and remove the split keeper. NOTE: To
prevent loss of tension, do not compress the valve
spring more than necessary.
2. Remove spring retainer and spring.
NOTE:The valve springs should be positioned with the
tightly wound coils against the cylinder head on progres-
sively wound springs (A).
3. Push valve out, keeping it in order for reassembly in
the same guide.
A
To Next Page
Loading...
