7
7.7
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
Gearcase Installation
1. To install gearcase, reverse removal procedures.
Use a new roll pin in front prop shaft.
2. Torque mounting bolts in skid plate to 30 ft-lbs (41
Nm).
Gearcase Mounting Bolt:
30 ft-lbs (41 Nm)
3. Add the proper lubricant to the front gearcase. Check
drain plug for proper torque. Refer to Chapter 2 for
fluid fill and change information.
FINAL DRIVE
To Next Page
Loading...
