Polaris Sportsman 800 EFI 4x4 2014 - Clutch Assembly

6.42
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
14. Inspect the clutch sheaves for excessive wear or
damage.
Clutch Assembly
1. Install a new bearing onto the clutch shaft using an
arbor press. Once bearing is fully seated, install a
new snap ring.
2. Install the shaft and bearing assembly into the outer
sheave.
IMPORTANT: Press only on the outer race of the
bearing during installation to prevent from
damaging the bearing.
CLUTCHING