3
3.37
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
Cylinder Inspection
1. Remove all gasket material from the cylinder sealing
surfaces.
2. Inspect the top of the cylinder (B) for warp using a
straight edge (A) and feeler gauge (C). Refer to Ill. 1
and Ill. 2.
Cylinder Warp: .004" (0.1 mm) Max.
3. Inspect cylinder for wear, scratches, or damage.
ENGINE
To Next Page
Loading...
