6
6.41
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
8. Remove the clutch assembly from the holding tool.
9. Press out the spring pins (I) in the inner sheave.
10. Pull out the clutch roller pins (J) and rollers (K).
11. Press the shaft and bearing out of the outer sheave
using an arbor press.
12. Inspect the bearing for wear. Spin the bearing, if the
bearing does not spin smoothly, replace it. To
replace the bearing, remove the snap ring from the
end of the shaft and press the bearing off the shaft.
13. Inspect the cam (helix) assembly bushing for wear. If
the bushing is worn or the shaft does not fit snug into
the bushing, replace the cam (helix) assembly.
CLUTCHING
To Next Page
Loading...
