6.40
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
4. Place the clutch into the Universal Clutch
Compressor Tool PU-50518. Press down on the top
of the spider assembly, pushing the spider onto the
shaft. Remove snap ring (A) and slowly release the
assembly.
5. Remove the spider assembly and spring (B).
NOTE: Spring is compression only and has no
torsional wind.
6. Remove the inside spider plate (D) and spider
dampener (E). Inspect the spider dampener (E) for
wear and replace if needed.
7. Remove the E-clips (F), washers (G), and the clutch
rollers (H). Inspect the rollers for wear; replace if
worn.
CLUTCHING
To Next Page
Loading...
