8
8.21
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
11. Install all new seals into the gearcases. Use the Rear
Output Seal Driver (PN 2871698) and Rear
Driveshaft Seal Guide (PN 2871699) to install the
seals into the gearcase halves (refer to the following
illustration to identify the seals needing
replacement).
12. Thoroughly clean the shift shaft housing. Be sure
the transmission is in Reverse prior to
reassembly.
13. Install the sector gear (16T) onto the shift drum shaft.
Install the shift shaft assembly and sector gear (11T)
into the bushing pocket on the left side. Align the
timing marks on the gears as shown.
TRANSMISSION
To Next Page
Loading...
