3.28
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
2. Measure free length of spring with a Vernier caliper.
Compare to specifications. Replace spring if
measurement is out of specification.
Valve Spring Free Length:
Std: 1.735" (44.069 mm)
3. Remove valve guide seals.
NOTE: It is recommended to replace seals
whenever the cylinder head is disassembled.
Hardened, cracked or worn valve seals will cause
excessive oil consumption and carbon buildup.
4. Mark the valves with a white pen. Remove the valves
from the cylinder head. This will ensure that the
valves are properly placed during engine
reassembly.
ENGINE
To Next Page
Loading...
