75
VEHICLE BREAK-IN PERIOD
3. Drive slowly at first. Select an area which is open and will give you room to familiar-
ize yourself with vehicle operation and handling.
4. Vary the throttle positions.
5. Perform regular checks on fluid levels, controls and all important areas on the ve-
hicle as outlined earlier on the daily pre-ride inspection checklist found on page 20.
Do not operate at full throttle or h igh speeds for e xtended periods during the
first three hours of use. Excessive heat can build up and cause damage to
close fitted engine parts.
CAUTION
To Next Page
Loading...
