109
BATTERY
Battery Removal
1. Disconnect hold down straps holding the electrical box and battery in position.
2. Disconnect the black (negative) battery cable first.
3. Disconnect the red (positive) battery cable next.
4. Lift the battery out of the ATV, being careful not to tip it sideways and spill electro-
lyte.
Indicates a potential hazard which could result
in severe injury or d eath .
WARNING
If electrolyte spills, immediately wash it off with a solution of one tablespoon
baking soda and one cup water to prevent damage to the ATV.
CAUTION
To Next Page
Loading...
