111
BATTERY
1. Set the battery in its holder.
2. First connect and tighten the red (positive) cable.
3. Second connect and tighten the black (negative) cable.
4. Attach the hold down strap.
5. Verify that cables are properly routed.
NOTE:
D When your ATV is placed in storage for three months or more, the battery
should be removed, charged to proper level, and stored in a cool dry place.
D Before reusing, take the battery to your dealer for testing and recharging.
D When installing a new battery, make certain it is fully charged prior to it’ s initial
use. Using a battery that is not fully charged can damage the battery resulting
in a shorter life of the battery. It can also hinder vehicle performance.
To Next Page
Loading...
