21
DAILY PRE-RIDE INSPECTION
6. Engine stop switch - check for proper function
7. Wheels - check for tightness of wheel nuts and axle nuts; check that axle nuts are
secure d by cotter pins
8. Drive chain - condition and slack; refer to drive chain adjustment
9. Air cleaner element - check for dirt; clean or replace
10. Steering - check for free operation noting any unusual looseness in any area
11. Loose parts-visually inspect vehicle for any damaged components or loose nuts/
bolts or fasteners
12. Operators helmet, goggles and clothing
Indicates a potential hazard which could result in
severe injury or death .
WARNING
To Next Page
Loading...
