FINAL DRIVE
7.4
FRONT HUB ASSEMBLY
1. Drive or press one new bearing into hub using a
1.180 (46 mm) bearing driver.
CAUTION:
Do not
drive on the inner race of the
bearing.
2. Coat bearing spacer with grease and install into
hub. Drive or press the other bearing into hub until
seated against spacer.
3. Install seal into hub (with numbers facing out) until
flush with end of seal bore.
Seal
Premium All-Season Grease
PN 2871322 (3 oz. T ube)
PN 2871423 (14 oz. T ube)
Seal
To Next Page
Loading...
