BRAKES
9.8
MASTER CYLINDER REMOVAL
1. Clean master cylinder and reservoir assembly. Make
sure you have a clean work area to disassemble brake
components.
2. Place a shop towel under brake line connection at
master cylinder. Loosen brake line 1/4 to 1/2 turn.
CAUTION:
Brake fluid will damage finished surfaces. Do not allow
brake fluid to come in contact with finished surfaces.
3. Remove master cylinder from handlebars.
4. Hold brake upright and continue to remove master
cylinder. Cover brake line to avoid spillage.
Master Cylinder
Piston Assy
Cover
Diaphragm
Sight Glass
To Next Page
Loading...
Need help?
General
