MAINTENANCE
2.13
CARBURETOR DRAINING
The carburetor float bowl should be drained periodically to
remove moisture or sediment from the bowl, or before ex-
tended periods of storage.
NOTE: The bowl drain screw is located on the bottom left
side of the float bowl.
1. T urn fuel valve to the off position.
2. Place a clean container beneath the bowl drain spigot
or bowl drain hose.
3. T urn drain screw out two turns and allow fuel in the
float bowl and fuel line to drain completely.
4. Inspect the drained fuel for water or sediment.
5. T ighten drain screw securely.
6. Turn fuel valve to “on”.
7. Start machine and check for leaks.
8. Replace vent line if removed.
Drain tube
attached
here
Drain Screw
ON
OFF
RES
Fuel Valve
To Next Page
Loading...
Need help?
General
