ENGINE
3.35
PISTON INSPECTION, CONT.
3. Measure piston pin bore.
4. Measure piston pin O.D. Replace piston and/or
piston pin if out of tolerance.
5. Measure connecting rod small end ID.
Piston Pin Bore:
.7095-.7097I (18.007-18.013 mm)
Piston Pin Measurement Locations
Piston Pin O.D.
.7092-.7095I (18.001-18.007 mm)
Connecting Rod Small End I.D.
.7095-.7101I (18.007-18.023 mm)
To Next Page
Loading...
