43
OPERATION
Driving Safely
Driving Through Water
Your Polaris UTV can operate through water up to a maximum
recommended depth equal to t he floorboards (1). Follow these
procedures when operating through water:
1. Always determine water
depths and current before
entering.
2. Choose a crossing where
both banks have gradual
inclines.
3. Proceed slowly, avoiding
rocks and obstacles.
4. After leaving water, always
dry the brakes by applying
light pressure to the lever
repeatedly until braking
action is normal.
NOTE: After running your vehicle in water, it’s critical that you
perform the services outlined in the Periodic Maintenance Schedule
beginning on page 54. Give special attention to engine oil,
transmission oil, front and rear gearcases, and all grease fittings.
WARNING
The large tires on your Polaris UTV may cause the vehicle to float in
deep or fast-flowing water, which could result in loss of control and
lead to serious injury or death. Never cross deep or fast-flowing
water with your UTV.
1
CAUTION
Immersion can result in major damage if the vehicle isn’t
serviced correctly and promptly. After immersion, always take the
vehicle to your dealer service. Do not start the engine!
If it’s impossible to bring the vehicle to your dealer before starting
the engine, perform the service outlined on page 72, and take
the vehicle to your dealer at the first opportunity.
To Next Page
Loading...
Need help?
General
