87
MAINTENANCE AND LUBRICATION
Tires
Tire Tread Depth
Always replace tires when tread depth
is worn to 1/8″ (.3 cm) or less.
Axle and Wheel Nut Torque Specifications
Inspect the following items occasionally for tightness, and if they’ve
been loosened for maintenance service.
Front Spindle Nut(s) Dealer Performed Service
Front Wheel Nuts 35 ft. lbs.
Center and Rear Hub
Retaining Nut(s)
120 ft. lbs.
Rear Wheel Nuts 35 ft. lbs.
WARNING
Operating your vehicle with worn tires will increase the possibility
of skidding, loss of control and an accident, which could result in
serious injury or death. Always replace tires when the tread
depth measures 1/8″ (.3 cm) or less.
Improper tire inflation or the use of non-standard size or type of
tires may adversely affect vehicle handling, which could result in
vehicle damage or personal injury. Always maintain proper tire
pressure. When replacing tires, always use original equipment
size and type.
1/8I (.3 cm)
To Next Page
Loading...
Need help?
General
