66
MAINTENANCE AND LUBRICATION
Gearcases
Middle Gearcase
The middle gearcase lubricant level should be checked at 25 hours or
monthly, whichever comes first. Middle gearcase oil should be
changed annually.
NOTE: Refer to the Gearcase Specifications Chart on page 67.
Always use P olaris Premium Gearcase Lube. See page 98 for the part
numbers of Polaris-recommended products.
The middle gearcase fill plug (1) is located on the driver’s side of the
gearcase.
Oil Check
1. With the UTV on a level
surface, remove the middle
gearcase fill plug and check the
lubricant level. Lubricant
should be even with the bottom
thread of the fill plug hole.
2. Reinstall the fill plug and
torque to specification.
Oil Change
1. Remove the fill plug.
2. Remove the drain plug (2) from
the bottom of the gearcase and drain the oil into a drain pan.
Discard used oil properly.
3. Clean and reinstall the drain plug. Torque to specification.
4. Add Polaris Premium Gearcase Lube until it reaches the bottom
thread of the fill plug hole.
5. Reinstall the fill plug and torque to specification. Check for leaks.
1
2
To Next Page
Loading...
Need help?
General
