POLMAR DB-2 - Page 67

63
6. Scanadded(SCAN)
Press[
],andthenpress[ ]key,rotatethePOWER/DIALknobkeyto
selectMenu6,LCDdisplays“SACN”,press[
]toenterandrotatethe
POWER/DIALknobkeytoselect“ADD”or“DEL”.PressPTTor[
]keyto
conrmthenpress[
]keytoexit.Thisfunctionisonlyavailableunder
channelmodeinordertoaddscanfunctionintothecurrentchannel.
ADD:scanadded
DEL:scandeleted
7. Offsetfrequency(DIFFER)
Press[
],andthenpress[ ]key,rotatethePOWER/DIALknobkeyto
selectMenu5,LCDdisplays“DIFFER”,press[
]toenterandrotatethe
POWER/DIALknobkeytoselectthedifferfrequencyfrom00.000MHz-
70.000MHz.PressPTTor[
]keytoconrmthenpress[ ]keytoexit.
8. Channelnamesetting(CH_NAM)
Channelnamecanbeeditedbyusers,6digitsorlettersinmaximum,this
functionisonlyavailableunderchannelmode.UnderCHandMRmode,press
[
],andthenpress[ ]key,rotatethePOWER/DIALknobkeytoselect
Menu8,LCDdisplays“NAME”,press[
]toenter,therstdigitblinksonthe
screen,rotatethePOWER/DIALknobkeytochoosefrom“0”-“9”and“A”,
press[
]keytoswitchtonextcharacter,press[ ]keytobacktolast
character,thenpress[
]keytoconrmthesetting.
9. Channelnamedisplaying(NAM_SW)
UnderCHandMRmode,rotateDIALNOLUMEknobtoswift“ON”and“OFF”
“ON”:displayaschannelnameyouedit
“OFF”:displayasfrequency
Note:pleaseeditthechannelnamerstwhenyouswiftas“ON”