POLMAR DB-2 - Shortcut Operation

56
SHORTCUT OPERATION
TheuserscanoperatetheTH-UV3Rrapidlyvia[
]+otherkeys.Detailsareas
below.
1. Squelchgradesetting
Press [
] key + number key [ ] key to enter squelch grade setting :0-9
grades.
RotatetheDIALknobtoadjustit.
2. High/Lowpowersetting
Press[
]key+numberkey[ ]keytoenterHigh/Lowpowersetting.
RotatetheDIALknobtoadjustandwhenyouselectLowpower,a“LOW’icon
willappearatthebottomoftheLCD.
3. Priorityscansetting
Press[
]key+numberkey[ ]keytoenterpriorityscansetting.
NotethatthisfunctionIsonlyavailableunderMRandCHmode.
4. Shiftoffsetdirectionsetting
Press[
]key+numberkey[ ]keytoenterShiftoffsetdirectionsetting
underVFOmode.RotatetheDIALknobtochoosedownward(-)orupward(+).
AndoneoftheseiconswillappearatthetopoftheLCDwhenrepeatershifts
havebeenenabled.
5. Frequencyreversesetting
Press[
]key+numberkey[ ]keytoenterfrequencyreversesetting.
NotethatthisfunctionisonlyavailableunderVFOmode.
6. Channelspacingstepsetting